Product Description
| Product Features | Description |
| Product Models | T2, T4, T6, T7, T8, T10, T12, T16, T20, T25, Z2, Z4, Z6, Z7, Z8, Z10, Z12, Z16, Z20, Z25, JRTM2, JRTM4, JRTM6, JRTM7, JRTM8, JRTM10, JRTM12, JRTM16, JRTM20, JRTM25 |
| Maintenance | Clean internally and replace lubricant after initial use of 2 weeks or 100-200 hours. For long-term use, replace lubricant every half to 1 year or every 1000-2000 hours |
| Lubricant | China Petroleum’s all-effect gear oil of 90-120 degrees. Under low speed and light load conditions, it is recommended to use all-effect gear oil of 90 degrees. Under heavy load and high temperature conditions, it is recommended to use all-effect gear oil of 120 degrees |
| Product Description | The T series spiral bevel gear steering gearbox is widely used in food, pharmaceutical, chemical, steel, metallurgy, textile, plastic, paper and other machinery equipment, assembly lines and other industries |
| Technical Features | The gearbox has a high rigidity FC-25 cast iron casing. The gears are made of high-quality high-purity alloy steel 20CrMnTi carburized and quenched, and ground. The shaft is tempered alloy steel with high load-bearing capacity. It is equipped with a heavy load-bearing tapered roller bearing. The oil seal has a double lip seal, which has dustproof and oil leakage prevention capabilities |
| Performance Features | The T series spiral bevel gear steering gearbox is standardized and has many varieties. The speed ratio is all actual transmission ratios, with an average efficiency of 98%. It can run CHINAMFG and reverse, with smooth low-speed or high-speed transmission, low noise, small vibration, and large bearing force |
| Technical Parameters | Speed ratio range: 1/1, 1.5/1, 2/1, 2.5/1, 3/1, 4/1, 5/1. Torque range: 11.2 – 5713 Nm. Power range: 0.014 – 335 kW |
·Product Models: T2, T4, T6, T7, T8, T10, T12, T16, T20, T25, Z2, Z4, Z6, Z7, Z8, Z10, Z12, Z16, Z20, Z25, JRTM2, JRTM4, JRTM6, JRTM7, JRTM8, JRTM10, JRTM12, JRTM16, JRTM20, JRTM25.
·Maintenance: The gearbox should be cleaned internally and the lubricant should be replaced after the initial use of 2 weeks or 100-200 hours. For long-term use, the lubricant should be replaced every half to 1 year or every 1000-2000 hours.
·Lubricant: The product uses China Petroleum’s all-effect gear oil of 90-120 degrees. Under low speed and light load conditions, it is recommended to use all-effect gear oil of 90 degrees. Under heavy load and high temperature conditions, it is recommended to use all-effect gear oil of 120 degrees.
·Product Description: The T series spiral bevel gear steering gearbox is widely used in food, pharmaceutical, chemical, steel, metallurgy, textile, plastic, paper and other machinery equipment, assembly lines and other industries.
·Technical Features: The gearbox has a high rigidity FC-25 cast iron casing. The gears are made of high-quality high-purity alloy steel 20CrMnTi carburized and quenched, and ground. The shaft is tempered alloy steel with high load-bearing capacity. It is equipped with a heavy load-bearing tapered roller bearing. The oil seal has a double lip seal, which has dustproof and oil leakage prevention capabilities.
·Performance Features: The T series spiral bevel gear steering gearbox is standardized and has many varieties. The speed ratio is all actual transmission ratios, with an average efficiency of 98%. It can run CHINAMFG and reverse, with smooth low-speed or high-speed transmission, low noise, small vibration, and large bearing force.
| Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
|---|---|
| Function: | Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase |
| Layout: | Coaxial |
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Step: | Three-Step |
| Samples: |
US$ 100/Piece
1 Piece(Min.Order) | |
|---|
Role of Spiral Bevel Gearboxes in Automotive and Aerospace Industries
Automotive Industry: Spiral bevel gearboxes have significant roles in the automotive sector:
a. Differential Systems: In vehicles, spiral bevel gearboxes are a key component of the differential system. They enable the distribution of torque between the left and right wheels while allowing them to rotate at different speeds during turns. This improves stability, traction, and maneuverability.
b. Transmissions: Spiral bevel gearboxes are also used in some manual transmissions. They help in transferring power and torque efficiently between the engine and the wheels, contributing to smooth gear shifting and overall vehicle performance.
c. Power Steering: In power steering systems, spiral bevel gearboxes assist in translating the rotational movement of the steering wheel into lateral movement of the wheels. This makes steering easier for the driver.
Aerospace Industry: In the aerospace sector, spiral bevel gearboxes have crucial roles:
a. Landing Gear Systems: Aircraft landing gear systems use spiral bevel gearboxes to control the extension and retraction of landing gear during takeoff and landing. These gearboxes ensure precise and synchronized movement, contributing to safe landings and takeoffs.
b. Flight Control Systems: Spiral bevel gearboxes are used in flight control systems to translate pilot inputs into controlled movements of control surfaces such as ailerons, elevators, and rudders. They ensure accurate and responsive control of the aircraft.
c. Engine Accessory Drives: Some aircraft engines utilize spiral bevel gearboxes to transfer power from the engine to various accessories such as generators, hydraulic pumps, and compressors. These gearboxes ensure efficient power distribution and operation of essential systems.
Spiral bevel gearboxes are crucial in both the automotive and aerospace industries, contributing to vehicle performance, safety, and overall functionality.
Materials for Manufacturing Spiral Bevel Gearboxes
Spiral bevel gearboxes are typically constructed using a variety of materials to ensure durability, strength, and reliable performance. Commonly used materials include:
- Steel Alloys: High-quality steel alloys, such as alloy steels or carburizing steels, are commonly used due to their excellent combination of strength, wear resistance, and toughness.
- Bronze Alloys: Bronze alloys, often used for gear teeth and bushings, offer good friction properties and self-lubricating characteristics.
- Cast Iron: Cast iron can be used for the housing or casing of spiral bevel gearboxes due to its excellent damping properties and resistance to wear and corrosion.
- Aluminum Alloys: In some cases, lightweight aluminum alloys are used to construct certain components of the gearbox to reduce overall weight.
- Stainless Steel: Stainless steel may be employed for components exposed to corrosive environments or for applications requiring high levels of cleanliness.
- Heat-Treated Steels: Heat treatment processes like case hardening, quenching, and tempering can enhance the hardness and strength of gear components.
The choice of material depends on factors such as the intended application, load conditions, operating environment, and the specific performance requirements of the gearbox.
Industries Using Spiral Bevel Gearboxes
Spiral bevel gearboxes find applications across various industries where precise power transmission, high torque capacity, and efficient motion transfer are essential. Some of the industries that commonly utilize spiral bevel gearboxes include:
- Automotive: Spiral bevel gears are used in automotive differentials, axles, and steering systems to transmit power efficiently and handle changing loads and directions.
- Aerospace: Aerospace applications require reliable and lightweight power transmission, making spiral bevel gears suitable for aircraft engines, landing gear, and control systems.
- Heavy Machinery: Industries like construction, mining, and agriculture use spiral bevel gearboxes in equipment such as excavators, bulldozers, tractors, and loaders.
- Manufacturing: Spiral bevel gears play a role in industrial machinery, conveyors, robotics, and machine tools, ensuring precise motion and power distribution.
- Marine: Marine propulsion systems and steering mechanisms benefit from the robustness and efficiency of spiral bevel gears.
- Energy: Spiral bevel gearboxes are used in power generation equipment, including wind turbines, hydroelectric generators, and gas turbines.
- Railways: Trains rely on spiral bevel gears in their transmission systems and bogie assemblies to deliver power and maintain stability.
The versatility, durability, and reliable performance of spiral bevel gearboxes make them a valuable component in various industrial sectors.
editor by CX 2023-09-18