Tag Archives: gearbox custom

China Custom Optimized Thermal Efficiency T Series Spiral Bevel Gear Steering Gearbox with Good quality

Product Description

 

Product Features Description
Product Models T2, T4, T6, T7, T8, T10, T12, T16, T20, T25, Z2, Z4, Z6, Z7, Z8, Z10, Z12, Z16, Z20, Z25, JRTM2, JRTM4, JRTM6, JRTM7, JRTM8, JRTM10, JRTM12, JRTM16, JRTM20, JRTM25
Maintenance Clean internally and replace lubricant after initial use of 2 weeks or 100-200 hours. For long-term use, replace lubricant every half to 1 year or every 1000-2000 hours
Lubricant China Petroleum’s all-effect gear oil of 90-120 degrees. Under low speed and light load conditions, it is recommended to use all-effect gear oil of 90 degrees. Under heavy load and high temperature conditions, it is recommended to use all-effect gear oil of 120 degrees
Product Description The T series spiral bevel gear steering gearbox is widely used in food, pharmaceutical, chemical, steel, metallurgy, textile, plastic, paper and other machinery equipment, assembly lines and other industries
Technical Features The gearbox has a high rigidity FC-25 cast iron casing. The gears are made of high-quality high-purity alloy steel 20CrMnTi carburized and quenched, and ground. The shaft is tempered alloy steel with high load-bearing capacity. It is equipped with a heavy load-bearing tapered roller bearing. The oil seal has a double lip seal, which has dustproof and oil leakage prevention capabilities
Performance Features The T series spiral bevel gear steering gearbox is standardized and has many varieties. The speed ratio is all actual transmission ratios, with an average efficiency of 98%. It can run CHINAMFG and reverse, with smooth low-speed or high-speed transmission, low noise, small vibration, and large bearing force
Technical Parameters Speed ratio range: 1/1, 1.5/1, 2/1, 2.5/1, 3/1, 4/1, 5/1. Torque range: 11.2 – 5713 Nm. Power range: 0.014 – 335 kW

·Product Models: T2, T4, T6, T7, T8, T10, T12, T16, T20, T25, Z2, Z4, Z6, Z7, Z8, Z10, Z12, Z16, Z20, Z25, JRTM2, JRTM4, JRTM6, JRTM7, JRTM8, JRTM10, JRTM12, JRTM16, JRTM20, JRTM25.

·Maintenance: The gearbox should be cleaned internally and the lubricant should be replaced after the initial use of 2 weeks or 100-200 hours. For long-term use, the lubricant should be replaced every half to 1 year or every 1000-2000 hours.

·Lubricant: The product uses China Petroleum’s all-effect gear oil of 90-120 degrees. Under low speed and light load conditions, it is recommended to use all-effect gear oil of 90 degrees. Under heavy load and high temperature conditions, it is recommended to use all-effect gear oil of 120 degrees.

·Product Description: The T series spiral bevel gear steering gearbox is widely used in food, pharmaceutical, chemical, steel, metallurgy, textile, plastic, paper and other machinery equipment, assembly lines and other industries.

·Technical Features: The gearbox has a high rigidity FC-25 cast iron casing. The gears are made of high-quality high-purity alloy steel 20CrMnTi carburized and quenched, and ground. The shaft is tempered alloy steel with high load-bearing capacity. It is equipped with a heavy load-bearing tapered roller bearing. The oil seal has a double lip seal, which has dustproof and oil leakage prevention capabilities.

·Performance Features: The T series spiral bevel gear steering gearbox is standardized and has many varieties. The speed ratio is all actual transmission ratios, with an average efficiency of 98%. It can run CHINAMFG and reverse, with smooth low-speed or high-speed transmission, low noise, small vibration, and large bearing force.

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Function: Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Three-Step
Samples:
US$ 100/Piece
1 Piece(Min.Order)

|
Request Sample

spiral bevel gearbox

Role of Spiral Bevel Gearboxes in Automotive and Aerospace Industries

Automotive Industry: Spiral bevel gearboxes have significant roles in the automotive sector:

a. Differential Systems: In vehicles, spiral bevel gearboxes are a key component of the differential system. They enable the distribution of torque between the left and right wheels while allowing them to rotate at different speeds during turns. This improves stability, traction, and maneuverability.

b. Transmissions: Spiral bevel gearboxes are also used in some manual transmissions. They help in transferring power and torque efficiently between the engine and the wheels, contributing to smooth gear shifting and overall vehicle performance.

c. Power Steering: In power steering systems, spiral bevel gearboxes assist in translating the rotational movement of the steering wheel into lateral movement of the wheels. This makes steering easier for the driver.

Aerospace Industry: In the aerospace sector, spiral bevel gearboxes have crucial roles:

a. Landing Gear Systems: Aircraft landing gear systems use spiral bevel gearboxes to control the extension and retraction of landing gear during takeoff and landing. These gearboxes ensure precise and synchronized movement, contributing to safe landings and takeoffs.

b. Flight Control Systems: Spiral bevel gearboxes are used in flight control systems to translate pilot inputs into controlled movements of control surfaces such as ailerons, elevators, and rudders. They ensure accurate and responsive control of the aircraft.

c. Engine Accessory Drives: Some aircraft engines utilize spiral bevel gearboxes to transfer power from the engine to various accessories such as generators, hydraulic pumps, and compressors. These gearboxes ensure efficient power distribution and operation of essential systems.

Spiral bevel gearboxes are crucial in both the automotive and aerospace industries, contributing to vehicle performance, safety, and overall functionality.

spiral bevel gearbox

Materials for Manufacturing Spiral Bevel Gearboxes

Spiral bevel gearboxes are typically constructed using a variety of materials to ensure durability, strength, and reliable performance. Commonly used materials include:

  • Steel Alloys: High-quality steel alloys, such as alloy steels or carburizing steels, are commonly used due to their excellent combination of strength, wear resistance, and toughness.
  • Bronze Alloys: Bronze alloys, often used for gear teeth and bushings, offer good friction properties and self-lubricating characteristics.
  • Cast Iron: Cast iron can be used for the housing or casing of spiral bevel gearboxes due to its excellent damping properties and resistance to wear and corrosion.
  • Aluminum Alloys: In some cases, lightweight aluminum alloys are used to construct certain components of the gearbox to reduce overall weight.
  • Stainless Steel: Stainless steel may be employed for components exposed to corrosive environments or for applications requiring high levels of cleanliness.
  • Heat-Treated Steels: Heat treatment processes like case hardening, quenching, and tempering can enhance the hardness and strength of gear components.

The choice of material depends on factors such as the intended application, load conditions, operating environment, and the specific performance requirements of the gearbox.

spiral bevel gearbox

Industries Using Spiral Bevel Gearboxes

Spiral bevel gearboxes find applications across various industries where precise power transmission, high torque capacity, and efficient motion transfer are essential. Some of the industries that commonly utilize spiral bevel gearboxes include:

  • Automotive: Spiral bevel gears are used in automotive differentials, axles, and steering systems to transmit power efficiently and handle changing loads and directions.
  • Aerospace: Aerospace applications require reliable and lightweight power transmission, making spiral bevel gears suitable for aircraft engines, landing gear, and control systems.
  • Heavy Machinery: Industries like construction, mining, and agriculture use spiral bevel gearboxes in equipment such as excavators, bulldozers, tractors, and loaders.
  • Manufacturing: Spiral bevel gears play a role in industrial machinery, conveyors, robotics, and machine tools, ensuring precise motion and power distribution.
  • Marine: Marine propulsion systems and steering mechanisms benefit from the robustness and efficiency of spiral bevel gears.
  • Energy: Spiral bevel gearboxes are used in power generation equipment, including wind turbines, hydroelectric generators, and gas turbines.
  • Railways: Trains rely on spiral bevel gears in their transmission systems and bogie assemblies to deliver power and maintain stability.

The versatility, durability, and reliable performance of spiral bevel gearboxes make them a valuable component in various industrial sectors.

China Custom Optimized Thermal Efficiency T Series Spiral Bevel Gear Steering Gearbox   with Good quality China Custom Optimized Thermal Efficiency T Series Spiral Bevel Gear Steering Gearbox   with Good quality
editor by CX 2023-09-18

China manufacturer ND Exporter Custom Spiral Bevel Increase Gearbox for Miny Rotary Tiller (BA1141) sequential gearbox

Product Description

Product Description

Item No.:

BA1141, Aluminum Housing Gearbox

Ratio and Shaft:

OEM acceptable

Key word

Agricultural Machinery Gearbox

Company Profile

In 2571, HangZhou CZPT Machinery Co.,ltd was established by Ms. Iris and her 2 partners(Mr. Tian and Mr. Yang) in HangZhou City, ZHangZhoug province, China, all 3 Founders are engineers who have more than averaged 30 years of experience. 

We, CZPT machinery established a complete quality management system and sales service network to provide clients with high-quality products and satisfactory service. Our products are sold in 36 countries and regions in the world, our main market is the European market.

Factory & Workshop

Professional
30 years experience engineman. R&D office, Test laboratory, CNC lathe workshop operated by professionals.

Responsible
2~10years warranty. Attitude determines everything, details determine success or failure. We are responsible for your products.

Scientific management
100% tested. Strict company system and scientific material management will reduce the error rate.
 

Certifications

We’re working on research and manufacturing all kinds of gearbox reducer and mechanical parts these 11 years, and have obtained certificates including ISO9001, many Gearbox Patents, SGS, BV, etc.

Sample Room

Through our CZPT brand ND, CZPT Machinery delivers agricultural solutions to agriculture machinery manufacturer and distributors CZPT through a full line of spiral bevel / straight bevel / spur gearboxes, drive shafts, sheet metal, hydraulic cylinder, motors, tyre, worm gearboxes, worm operators etc. Products can be customized as request.

 

FAQ

Q: Are you trading company or manufacturer ?
A: We are exactly a factory.

Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: How long is your delivery time ? What is your terms of payment ?
A: Generally it is 40-45 days. The time may vary depending on the product and the level of customization. For standard products, the payment is: 30% T/T in advance, balance before shippment.

Q: What is the exact MOQ or price for your product ?
A: As an OEM company, we can provide and adapt our products to a wide range of needs.Thus, MOQ and price may greatly vary with size, material and further specifications; For instance, costly products or standard products will usually have a lower MOQ. Please contact us with all relevant details to get the most accurate quotation.

If you have another question, please feel free to contact us.

Application: Motor, Machinery, Agricultural Machinery, Industrial Machinery, etc
Function: Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Shaft T or L Type
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Step: Single-Step
Samples:
US$ 200/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

spiral bevel gearbox

Differences Between Spiral Bevel Gearboxes and Other Gearbox Types

Spiral bevel gearboxes differ from other gearbox types in several key aspects:

  • Gear Tooth Design: Spiral bevel gearboxes use spiral bevel gears with angled teeth, which allow for smoother meshing and reduced impact compared to straight bevel gears. In contrast, other gearbox types might use spur gears, helical gears, or worm gears, each with distinct tooth profiles.
  • Shaft Arrangement: Spiral bevel gearboxes have intersecting input and output shafts set at right angles. This enables power transmission between shafts that are not aligned. Other gearbox types, such as parallel shaft gearboxes, have shafts that are parallel to each other.
  • Direction Changes: Spiral bevel gearboxes are well-suited for applications requiring direction changes between input and output shafts due to their perpendicular shaft arrangement. Worm gearboxes, on the other hand, are commonly used for large speed reductions and right-angle drives.
  • High Torque Transmission: Spiral bevel gearboxes offer high torque transmission capabilities due to the larger contact area of their gear teeth. Planetary gearboxes, while also capable of handling high torque, have a different gear arrangement involving sun, planet, and ring gearsspiral bevel gearbox

    Precision in Spiral Bevel Gear Tooth Profile Design

    Manufacturers employ advanced techniques to ensure precision in the design of spiral bevel gear tooth profiles:

    • Computer-Aided Design (CAD): Despiral bevel gearbox

      Noise and Vibration Levels in Spiral Bevel Gearboxes

      Spiral bevel gearboxes are known for their relatively low noise and vibration levels compared to other gearbox types. Several factors contribute to their favorable noise and vibration characteristics:

      • Tooth Profile: The involute tooth profile of spiral bevel gears results in gradual and smooth tooth engagement, reducing impact and noise during gear meshing.
      • Contact Pattern: Properly aligned spiral bevel gears create a larger contact area along the tooth surfaces, distributing loads and minimizing localized stress, which helps reduce noise and vibration.
      • Precision Manufacturing: High-precision manufacturing techniques ensure accurate tooth geometry, reducing irregularities that could lead to noise and vibration.
      • Lubrication: Adequate lubrication in spiral bevel gearboxes helps dampen vibrations and reduce friction-induced noise.
      • Bearing Quality: High-quality bearings used in spiral bevel gearboxes contribute to smoother operation and reduced vibrations.

      While spiral bevel gearboxes inherently exhibit lower noise and vibration levels, it’s important to note that external factors such as misalignment, wear, inadequate lubrication, or improper maintenance can still contribute to increased noise and vibration over time. Proper installation, maintenance, and monitoring play key roles in maintaining the desired noise and vibration levels in spiral bevel gearboxes.

      sign engineers use CAD software to create accurate tooth profiles, considering factors like gear ratio, tooth contact, and load distribution.

    • Finite Element Analysis (FEA): FEA simulations analyze stress distribution, deformation, and contact patterns to optimize tooth profiles for strength and durability.
    • Manufacturing Precision: Modern manufacturing methods, such as CNC machining and grinding, ensure tight tolerances and accurate tooth profiles.
    • Gear Cutting: Gleason or Klingelnberg gear cutting machines produce precise gear tooth profiles by using specialized cutting tools and controlled processes.
    • Tooth Surface Inspection: Manufacturers employ advanced measuring equipment to verify tooth geometry, profile accuracy, and alignment.
    • Contact Pattern Analysis: Before finalizing the design, contact pattern simulations help optimize tooth engagement for even load distribution.
    • Material Selection: Choosing suitable materials with excellent dimensional stability further enhances tooth profile precision.

    By leveraging these techniques and technologies, manufacturers can ensure the precision and quality of spiral bevel gear tooth profiles, resulting in efficient power transmission and reduced wear.

    .

  • Noise and Vibration: Spiral bevel gearboxes tend to produce less noise and vibration compared to straight bevel gearboxes, thanks to their spiral tooth design. Helical gearboxes, which also use angled teeth, offer similar advantages in terms of noise reduction.
  • Applications: Spiral bevel gearboxes are commonly used in automotive differentials, aerospace systems, and heavy machinery. Other gearbox types find applications in various industries based on their unique characteristics and advantages.

Overall, the distinctive features of spiral bevel gearboxes set them apart from other gearbox types, making them suitable for specific applications where direction changes, torque transmission, and smooth operation are critical factors.

China manufacturer ND Exporter Custom Spiral Bevel Increase Gearbox for Miny Rotary Tiller (BA1141)   sequential gearbox	China manufacturer ND Exporter Custom Spiral Bevel Increase Gearbox for Miny Rotary Tiller (BA1141)   sequential gearbox
editor by CX 2023-08-30

China Custom ZD Hardened Surface Iron Aluminum Low-Noise Planetary Gearbox Without Motor for Packing Mechanism synchromesh gearbox

Product Description

Model Selection

 

ZD Leader has a wide range of micro motor production lines in the industry, including DC Motor, AC Motor, Brushless Motor, Planetary Gear Motor, Drum Motor, Planetary Gearbox, RV Reducer and Harmonic Gearbox etc. Through technical innovation and customization, we help you create outstanding application systems and provide flexible solutions for various industrial automation situations.

• Model Selection
Our professional sales representive and technical team will choose the right model and transmission solutions for your usage depend on your specific parameters.

• Drawing Request

If you need more product parameters, catalogues, CAD or 3D drawings, please contact us.
 

• On Your Need

We can modify standard products or customize them to meet your specific needs.

Detailed Photos

Product Parameters

Other Related Products

Click here to find what you are looking for:

Company Profile

 

FAQ

Q: What’re your main products?
A: We currently produce Brushed Dc Motors, Brushed Dc Gear Motors, Planetary Dc Gear Motors, Brushless Dc Motors, Stepper motors, Ac Motors and High Precision Planetary Gear Box etc. You can check the specifications for above motors on our website and you can email us to recommend needed motors per your specification too.

Q: How to select a suitable motor?
A:If you have motor pictures or drawings to show us, or you have detailed specs like voltage, speed, torque, motor size, working mode of the motor, needed lifetime and noise level etc, please do not hesitate to let us know, then we can recommend suitable motor per your request accordingly.

Q: Do you have a customized service for your standard motors?
A: Yes, we can customize per your request for the voltage, speed, torque and shaft size/shape. If you need additional wires/cables soldered on the terminal or need to add connectors, or capacitors or EMC we can make it too.

Q: Do you have an individual design service for motors?
A: Yes, we would like to design motors individually for our customers, but it may need some mold developing cost and design charge.

Q: What’s your lead time?
A: Generally speaking, our regular standard product will need 15-30days, a bit longer for customized products. But we are very flexible on the lead time, it will depend on the specific orders.

Application: Motor
Layout: Cycloidal
Installation: Vertical Type
Step: Double-Step
Size: 32, 42, 52, 62,72mm
Manipulate Way: Forced Manipulation
Customization:
Available

|

Customized Request

gearbox

Types of Gearboxes Used in Wind Turbines

Many manufacturers of wind turbines have chosen different solutions for the drive train of the turbines. Most prefer gearboxes because of their durability. These have several design features that make them well suited to shocks, stresses and wear. Regardless of the type of gearbox used, continuous maintenance and monitoring can extend the lifespan of these machines. Performing these tasks regularly can help detect and resolve any problems before they become serious. Here are some of the problems associated with gearboxes.

Coaxial helical gearbox

The R series helical inline gearbox is a high-quality speed reducer for heavy-duty industrial applications. These units are designed with increased power density in mind and are equipped with various cooling options. High-grade seals and lubricants help to increase efficiency and minimize thermal loading. They are ATEX-compliant. Their reversible modules are an excellent choice for high-speed applications, such as compressors, compressor blowers, and pumps.
The normal module set of helical gearbox is manufactured using the same tooth-cutting techniques as spur gears. This allows the production of higher-quality, more economical, and more compact helical gears. Although the performance of helical gears is lower than spur gears, they are durable and capable of transferring motion and power between two shafts. And because they are able to handle a much greater load, they are preferred for heavy-duty applications.
The main tooth form of a helical gearbox presents fixed velocity ratios, even if the center gap is not completely set. This requirement is sometimes referred to as the fundamental rule of gearing. A helical gearbox is similar to a set of paper spur gears, with the exception that the sections must stagger in opposite directions. There are two kinds of helical gears for parallel shafts: left-handed and right-handed.
The Industrial Gearbox market is segmented based on product type, application, and geography. The report analyzes the competitive scenario by segmenting the market by region, company, and type. Using this information, it estimates market size, revenue, and consumption. The report also features key information about COVID-19 and its impact on the overall industry. And it also provides a competitive landscape with industry-leading players.
Industrial gearboxes are integrated with devices and make automation processes more efficient and reliable. Increasing labor costs, shortage of skilled labor, and the ageing workforce are driving the demand for automation technologies. The industry requires newer and more advanced models and technologies to compete in the global market. You can use Coaxial helical gearbox in a variety of applications. Its benefits are endless. If you are looking for a reliable, high-performance industrial gearbox, CZPT can help you find it.
gearbox

Worm reduction gearbox

As a general rule, larger center distance worm reduction gearboxes are more efficient than smaller ones. Worm gearboxes with 2.6-in. center distances start to lose efficiency as their ratios increase. Larger center distances tend to have higher efficiency than smaller ones. However, this difference may not always be enough to justify the higher investment. Worm gear reducers typically cost less than equivalent helical units.
The use of aluminum for worm reduction gearboxes is a popular choice for those involved in the manufacturing of Packaging Equipment. In addition to being lightweight, aluminum worm reduction gearboxes have high strength and rigidity. Manufacturers recommend this choice because of its high rigidity and durability. While purchasing aluminum worm reduction gearboxes, keep in mind that they are more expensive than steel versions. However, they have a longer lifespan and are highly resistant to wear.
The worm’s helix angle is larger than a helical gear, which allows a much higher gear ratio. In addition, the worm’s body is usually longer in the axial direction than helical gears. Worm reduction gears are often left-handed, and British or Indian standards are usually followed. The worm wheel is made of hardened alloy steel PB2-C, while the gearbox case is made of hardened alloy steel FG 220 or FG 250res.
The worms in a sacrificial system are relatively safe from wear. Instead, the softer wheel is the cause of most wear and tear. The oil analysis report for a sacrificial system shows low iron levels and high copper concentrations. However, if a worm reduction gearbox has a bad reputation, you should consider purchasing a new one. If the worm gears are in good condition, the gearbox is still a viable option for a new or replacement vehicle.
The advantages of a worm reduction gearbox are numerous. The worm gearbox is widely used in industrial settings, where it provides torque and speed reduction to move products. Worm gearboxes are also commonly used in automatic security gates, which will not run in reverse. Most security gates use two separate worm drives to keep the gate in the closed position. There are also many other uses for worm reducers. You can learn more about the benefits of worm gearboxes by reading below.

Stainless steel gearbox

Stainless steel gearboxes offer a number of advantages over standard gearboxes. They match the existing stainless motor design and cost 50 percent more on average. They have stainless output shafts and housings as well as corrosion resistant hardware and a food grade lubricant. Stainless steel gearboxes feature IP 65 sealing, Viton shaft seals at the input and output shafts, and a Buna o-ring between the housings. Stainless steel gearboxes also eliminate flat surfaces and allow for a cylindrical design.
Stainless steel gearboxes are more durable than traditional cast iron or epoxy-painted gearboxes. These gearboxes can withstand repeated washdown operations without damage. They also do not collect particles or bacteria. And because stainless steel does not corrode, stainless steel gearboxes can withstand harsh environments, such as oily or greasy environments. Because stainless steel gearboxes are corrosion-resistant, they require little maintenance. They are also easier to clean and maintain, resulting in fewer replacements and a longer life span for your gearbox.
Stainless steel gearboxes are a great choice for food and other industries that require high hygiene standards. In addition to its durability, stainless steel gearboxes are ideal for applications in environments that require high levels of humidity and water. They are also life-lubricated, and they can be supplied with food-grade oils or water. The CZPT Gears stainless gearbox is a versatile option for a variety of applications.
Stainless steel gearboxes offer superior corrosion protection and can withstand harsh environments. The stainless steel cover, housing, and external hardware ensure superior corrosion protection. If you have questions about the varying benefits of stainless steel gearboxes, contact a CZPT Gear sales representative to learn more about your options. And if you are not sure which type is right for your needs, contact a CZPT Gear sales representative to find the perfect solution for your business.
gearbox

1 speed gearbox

Volkswagen Group Components manufactures the one speed gearbox. The gearbox has a high-performance electric drive motor that produces 310 Nm of torque over a wide speed range. Designed for maximum range, this gearbox uses a single gear for all driving situations. It is extremely quiet, too, and requires precision manufacturing. Volkswagen has also made it available in a reverse-gear configuration with power electronics. Volkswagen’s ID.3 EV’s e-drive motor is a perfect example of this.
The first part of the transmission corresponds to the even and odd gears, while the second part has the straighter gears. A single gear set can change between both modes. An intermediate gear set is also possible. A lastshelf gear can be formed by hydraulically betigte Lamellenkupplungen. Both types of gears can be exchanged between partial transmissions. The invention may furthermore include a transmission with the same gear ratios as the first part of the transmission.
Another variation of the one speed gearbox is the CVT. This type of gearbox has only one drive unit, which means it does not require a clutch or brake. Its power is derived from the torque generated by the Internal Combustion Engine at a particular speed. The engine cannot sustain such high torque levels above 5500 RPM, which will reduce the MPG. Also, raising the RPM will reduce the acceleration, and in severe cases may lead to an engine crash.
As the number of applications for a 1 speed gearbox increases, its design and functionality will continue to evolve. Bosch Rexroth has developed its eGFZ gearbox based on customer feedback. They are currently working on various pilot projects and hope to put it into production in the next few years. However, if you want to buy a 1 speed gearbox now, consider the benefits of a first-rate design.

China Custom ZD Hardened Surface Iron Aluminum Low-Noise Planetary Gearbox Without Motor for Packing Mechanism   synchromesh gearbox	China Custom ZD Hardened Surface Iron Aluminum Low-Noise Planetary Gearbox Without Motor for Packing Mechanism   synchromesh gearbox
editor by CX 2023-05-18

China Custom F Series Parallel Shaft Helical Hollow Shaft Electric Motor Speed Reducer Gearbox gearbox adjustment

Product Description

 

Product Description

Product Description

-F Series Parallel Shaft Helical gearbox

 

Product Features

1. Modular design, compact structure. Extra-slim parallel shaft helical gearmotors are the perfect solution when space is limited     
2. F series parallel shaft helical gearmotors are typically used in conveyors and materials processing applications      
3. Multi-stage (2 or 3 stages) gear units for low output speed     
4. Hollow output shaft with keyed connection, shrink disk, splined hollow shaft, or torque arm
5. Can be combined with other types of gearboxes (Such as R Series, UDL Series)    
6. Optional mounting options (foot-mounted, flange-mounted, shaft-mounted)    

 

 

 

Product Parameters

 

Models Output Shaft Dia. Input Shaft Dia. Power(kW) Ratio Max. Torque(Nm)
Solid Shaft Hollow Shaft
F38 25mm 30mm 16mm 0.18~3.0 3.81~128.51 200
F48 30mm 35mm 16mm 0.18~3.0 5.06~189.39 400
F58 35mm 40mm 19mm 0.18~5.5 5.18~199.70 600
F68 40mm 40mm 19mm 0.18~5.5 4.21~228.99 820
F78 50mm 50mm 24mm 0.37~11 4.30~281.71 1500
F88 60mm 60mm 28mm 0.75~22 4.20~271.92 3000
F98 70mm 70mm 38mm 1.1~30 4.68~276.64 4300
F108 90mm 90mm 42mm 2.2~45 6.20~255.25 7840
F128 110mm 100mm 55mm 7.5~90 4.63~172.33 12000
F158 120mm 120mm 70mm 11~200 12.07~270.18 18000

 

Materials Data Sheet

Housing material

Grey Cast iron

Housing hardness

HBS163~255

Gear material

20CrMnTi alloy steel

Surface hardness of gears

HRC58°~62 °

Gear core hardness

HRC33~48

Input / Output shaft material

40Cr alloy steel

Input / Output shaft hardness

HRC32~36

Machining precision of gears

accurate grinding, 6~5 Grade

Lubricating oil

GB L-CKC220-460, Shell Omala220-460

Heat treatment

tempering, cementiting, quenching, normalizing, etc.

Efficiency

94%~96% (depends on the transmission stage)

Noise (MAX)

60~68dB

Temp. rise (MAX)

40°C

Temp. rise (Oil)(MAX)

50°C

Vibration

≤20µm

Backlash

≤20Arcmin

Brand of bearings

China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, SKF, FAG, INA, NSK.

Brand of oil seal

NAK — ZheJiang or other brands requested

 

Detailed Photos

Our process of production

 

 

Our product line

 

Company Profile

Company Profile

Bode was founded in 2007, which is located in HangZhou city, ZHangZhoug province. As 1 professional manufacturer and exporter, we have more than 17 years’ experience in R & D of worm reducer, gear reducer, gearbox , AC motor and relative spare parts. We have factory with advanced production and test equipment, the strong development of team and producing capacity offer our customers with high quality products. Our products widely served to various industries of Metallurgy, Chemicals, lifting, mining, Petroleum, textile, medicine, wooden etc. Main markets: China, Africa, Australia, Vietnam, Turkey, Japan, Korea, Philippines… Welcome to ask us any questions, good offer always for you for long term business.

FAQ

Q1: Are you trading company or manufacturer?
A: We are factory.

Q2: What kinds of gearbox can you produce for us?
A: Main products of our company: R, S, K, F series helical-tooth reducer, RV series worm gear reducer,H Series Parallel Shaft Helical Reduction Gear Box

Q3: Can you make as per custom drawing?
A: Yes, we offer customized service for customers.

Q4: Can we buy 1 pc of each item for quality testing?
A: Yes, we are glad to accept trial order for quality testing.

Q5: What information shall we give before placing a purchase order?
A:  a) Type of the gearbox, ratio, input and output type, input flange, mounting position, and motor informationetc.
     b) Housing color.
     c) Purchase quantity.
     d) Other special requirements.

Q6: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock.

Q7: What is your terms of payment ?
A: 30% Advance payment by T/T after signing the contract.70% before delivery

Dear customers,  If you are interested in our product, welcome to contact with us.
Our team will do our best to meet your need 🙂 

 

Application: Machinery, Marine, Agricultural Machinery
Function: Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Vertical Type
Step: Single-Step
Samples:
US$ 50/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

The Parts of a Gearbox

There are many parts of a Gearbox, and this article will help you understand its functions and components. Learn about its maintenance and proper care, and you’ll be on your way to repairing your car. The complexity of a Gearbox also makes it easy to make mistakes. Learn about its functions and components so that you’ll be able to make the best choices possible. Read on to learn more. Then, get your car ready for winter!
gearbox

Components

Gearboxes are fully integrated mechanical components that consist of a series of gears. They also contain shafts, bearings, and a flange to mount a motor. The terms gearhead and gearbox are not often used interchangeably in the motion industry, but they are often synonymous. Gearheads are open gearing assemblies that are installed in a machine frame. Some newer designs, such as battery-powered mobile units, require tighter integration.
The power losses in a gearbox can be divided into no-load and load-dependent losses. The no-load losses originate in the gear pair and the bearings and are proportional to the ratio of shaft speed and torque. The latter is a function of the coefficient of friction and speed. The no-load losses are the most serious, since they represent the largest proportion of the total loss. This is because they increase with speed.
Temperature measurement is another important preventive maintenance practice. The heat generated by the gearbox can damage components. High-temperature oil degrades quickly at high temperatures, which is why the sump oil temperature should be monitored periodically. The maximum temperature for R&O mineral oils is 93degC. However, if the sump oil temperature is more than 200degF, it can cause seal damage, gear and bearing wear, and premature failure of the gearbox.
Regardless of its size, the gearbox is a crucial part of a car’s drivetrain. Whether the car is a sports car, a luxury car, or a farm tractor, the gearbox is an essential component of the vehicle. There are two main types of gearbox: standard and precision. Each has its own advantages and disadvantages. The most important consideration when selecting a gearbox is the torque output.
The main shaft and the clutch shaft are the two major components of a gearbox. The main shaft runs at engine speed and the countershaft may be at a lower speed. In addition to the main shaft, the clutch shaft has a bearing. The gear ratio determines the amount of torque that can be transferred between the countershaft and the main shaft. The drive shaft also has another name: the propeller shaft.
The gears, shafts, and hub/shaft connection are designed according to endurance design standards. Depending on the application, each component must be able to withstand the normal stresses that the system will experience. Oftentimes, the minimum speed range is ten to twenty m/s. However, this range can differ between different transmissions. Generally, the gears and shafts in a gearbox should have an endurance limit that is less than that limit.
The bearings in a gearbox are considered wear parts. While they should be replaced when they wear down, they can be kept in service much longer than their intended L10 life. Using predictive maintenance, manufacturers can determine when to replace the bearing before it damages the gears and other components. For a gearbox to function properly, it must have all the components listed above. And the clutch, which enables the transmission of torque, is considered the most important component.
gearbox

Functions

A gearbox is a fully integrated mechanical component that consists of mating gears. It is enclosed in a housing that houses the shafts, bearings, and flange for motor mounting. The purpose of a gearbox is to increase torque and change the speed of an engine by connecting the two rotating shafts together. A gearbox is generally made up of multiple gears that are linked together using couplings, belts, chains, or hollow shaft connections. When power and torque are held constant, speed and torque are inversely proportional. The speed of a gearbox is determined by the ratio of the gears that are engaged to transmit power.
The gear ratios in a gearbox are the number of steps a motor can take to convert torque into horsepower. The amount of torque required at the wheels depends on the operating conditions. A vehicle needs more torque than its peak torque when it is moving from a standstill. Therefore, the first gear ratio is used to increase torque and move the vehicle forward. To move up a gradient, more torque is required. To maintain momentum, the intermediate gear ratio is used.
As metal-to-metal contact is a common cause of gearbox failure, it is essential to monitor the condition of these components closely. The main focus of the proactive series of tests is abnormal wear and contamination, while the preventative tests focus on oil condition and additive depletion. The AN and ferrous density tests are exceptions to this rule, but they are used more for detecting abnormal additive depletion. In addition, lubrication is critical to the efficiency of gearboxes.
gearbox

Maintenance

Daily maintenance is a critical aspect of the life cycle of a gearbox. During maintenance, you must inspect all gearbox connection parts. Any loose or damaged connection part should be tightened immediately. Oil can be tested using an infrared thermometer and particle counters, spectrometric analysis, or ferrography. You should check for excessive wear and tear, cracks, and oil leaks. If any of these components fail, you should replace them as soon as possible.
Proper analysis of failure patterns is a necessary part of any preventative maintenance program. This analysis will help identify the root cause of gearbox failures, as well as plan for future preventative maintenance. By properly planning preventative maintenance, you can avoid the expense and inconvenience of repairing or replacing a gearbox prematurely. You can even outsource gearbox maintenance to a company whose experts are knowledgeable in this field. The results of the analysis will help you create a more effective preventative maintenance program.
It is important to check the condition of the gearbox oil periodically. The oil should be changed according to its temperature and the hours of operation. The temperature is a significant determinant of the frequency of oil changes. Higher temperatures require more frequent changes, and the level of protection from moisture and water reduces by 75%. At elevated temperatures, the oil’s molecular structure breaks down more quickly, inhibiting the formation of a protective film.
Fortunately, the gear industry has developed innovative technologies and services that can help plant operators reduce their downtime and ensure optimal performance from their industrial gears. Here are 10 steps to ensure that your gearbox continues to serve its purpose. When you are preparing for maintenance, always keep in mind the following tips:
Regular vibration analysis is a vital part of gearbox maintenance. Increased vibration signals impending problems. Visually inspect the internal gears for signs of spiraling and pitting. You can use engineers’ blue to check the contact pattern of gear teeth. If there is a misalignment, bearings or housings are worn and need replacement. Also make sure the breathers remain clean. In dirty applications, this is more difficult to do.
Proper lubrication is another key factor in the life of gearboxes. Proper lubrication prevents failure. The oil must be free of foreign materials and have the proper amount of flow. Proper lubricant selection depends on the type of gear, reduction ratio, and input power. In addition to oil level, the lubricant must be regulated for the size and shape of gears. If not, the lubricant should be changed.
Lack of proper lubrication reduces the strength of other gears. Improper maintenance reduces the life of the transmission. Whether the transmission is overloaded or undersized, excessive vibration can damage the gear. If it is not properly lubricated, it can be damaged beyond repair. Then, the need for replacement gears may arise. However, it is not a time to waste a lot of money and time on repairs.

China Custom F Series Parallel Shaft Helical Hollow Shaft Electric Motor Speed Reducer Gearbox   gearbox adjustment	China Custom F Series Parallel Shaft Helical Hollow Shaft Electric Motor Speed Reducer Gearbox   gearbox adjustment
editor by CX